A chave simples para batteries Unveiled
A chave simples para batteries Unveiled
Blog Article
The electrochemical reaction in a battery is carried out by moving electrons from one material to another (called electrodes) using an electric current. The first battery was invented in 1800 by Italian physicist Alessandro Volta.
Secondary (rechargeable) batteries can be discharged and recharged multiple times using an applied electric current; the original composition of the electrodes can be restored by reverse current. Examples include the lead–acid batteries used in vehicles and lithium-ion batteries used for portable electronics such as laptops and mobile phones.
These are made in various sizes and capacities, from portable sealed to large fanned cells used for standby power and motor power. Smaller packs are used in portable devices, electronics, and toys, while larger packs are used in aircraft starting batteries and electric vehicles.
Common household batteries Primary batteries type chemistry sizes and common applications features zinc-carbon (Leclanché) zinc alloy anode-manganese dioxide cathode with an electrolyte mix of 80 percent ammonium chloride and 20 percent zinc chloride surrounding a carbon rod electrode; 1.55 volts per cell, declining in use widest range of sizes, shapes, and capacities (including all major cylindrical and rectangular jackets); used in remote controls, flashlights, portable radios cheap and lightweight; low energy density; very poor for high-drain applications; poor performance at low temperatures; disposal hazard from toxic mercury and cadmium present in zinc alloy zinc chloride zinc anode-manganese dioxide cathode with zinc chloride electrolyte; 1.55 volts per cell, declining in use wide range of cylindrical and rectangular jackets; used in motorized toys, cassette and CD players, flashlights, portable radios usually labeled "heavy duty"; less voltage decline at higher drain rates and lower temperatures than zinc-carbon; typically 2–3 times the life of zinc-carbon batteries; environmentally safe Alkaline zinc-manganese dioxide zinc anode-manganese dioxide cathode with potassium hydroxide electrolyte; 1.55 volts per cell wide range of cylindrical and rectangular jackets; best for use in motorized toys, cassette and CD players long shelf life; leak-resistant; best performance under heavy loads; 4–10 times the life of zinc-carbon batteries zinc-silver oxide zinc anode-silver oxide cathode with a potassium hydroxide electrolyte; 1.55 volts per cell button batteries; used in hearing aids, watches, calculators high energy density; long shelf life; expensive zinc-air zinc anode-oxygen cathode with potassium hydroxide electrolyte cylindrical, nove-volt, button, and coin jackets; used in hearing aids, pagers, watches highest energy density of all disposable batteries; virtually unlimited shelf life; environmentally safe Lithium lithium-iron sulfide lithium anode-iron sulfide cathode with organic electrolyte; 1.
g., a lamp or other device) must be provided to carry electrons from the anode to the negative battery contact. Sufficient electrolyte must be present as well. The electrolyte consists of a solvent (water, an organic liquid, or even a solid) and one or more chemicals that dissociate into ions in the solvent. These ions serve to deliver electrons and chemical matter through the cell interior to balance the flow of electric current outside the cell during cell operation.
In the 2000s, developments include batteries with embedded electronics such as USBCELL, акумулатори цена which allows charging an AA battery through a USB connector, nanoball batteries that allow for a discharge rate about 100x greater than current batteries, and smart battery packs with state-of-charge monitors and battery protection circuits that prevent damage on over-discharge. Low self-discharge (LSD) allows secondary cells to be charged prior to shipping.
Reactions are not fully understood. Terminal voltage very stable but suddenly drops to 1.5 volts at 70–80% charge (believed to be due to presence of both argentous and argentic oxide in positive plate; one is consumed first). Has been used in lieu of primary battery (moon buggy). Is being developed once again as a replacement for Li-ion.
It is a rechargeable battery used in everyday electronic devices such as smartphones, laptop computers, and portable power tools. In this type, the chemical reaction at the positive electrode is similar to that of a nickel-cadmium cell, with both using nickel oxide hydroxide.
The versatile nature of batteries means they can serve utility-scale projects, behind-the-meter storage for households and businesses and provide access to electricity in decentralised solutions like mini-grids and solar home systems. Moreover, falling costs for batteries are fast improving the competitiveness of electric vehicles and storage applications in the power sector.
This article needs additional citations for verification. Please help improve this article by adding citations to reliable sources. Unsourced material may be challenged and removed.
Every battery (or cell) has a cathode, or positive plate, and an anode, or negative plate. These electrodes must be separated by and are often immersed in an electrolyte that permits the passage of ions between the electrodes. The electrode materials and the electrolyte are chosen and arranged so that sufficient electromotive force (measured in volts) and electric current (measured in amperes) can be developed between the terminals of a battery to operate lights, machines, or other devices.
Battery life (or lifetime) has two meanings for rechargeable batteries but only one for non-chargeables. It can be used to describe the length of time a device can run on a fully charged battery—this is also unambiguously termed "endurance".[55] For a rechargeable battery it may also be used for the number of charge/discharge cycles possible before the cells fail to operate satisfactorily—this is also termed "lifespan".[56] The term shelf life is used to describe how long a battery will retain its performance between manufacture and use.
These rechargeable batteries have two electrodes: one that's called a positive electrode and contains lithium, and another called a negative electrode that's typically made of graphite. Electricity is generated when electrons flow through a wire that connects the two.
A dry cell uses a paste electrolyte, with only enough moisture to allow current to flow. Unlike a wet cell, a dry cell can operate in any orientation without spilling, as it contains pelo free liquid, making it suitable for portable equipment. By comparison, the first wet cells were typically fragile glass containers with lead rods hanging from the open top and needed careful handling to avoid spillage. Lead–acid batteries did not achieve the safety and portability of the dry cell until the development of the gel battery. A common dry cell is the zinc–carbon battery, sometimes called the dry Leclanché cell, with a nominal voltage of 1.